Recipe cost calculator
Pack prices in. Plate cost, food cost percentage and a suggested menu price out — with yield, unit conversion and tax for the US, UK, India, UAE, Saudi Arabia and Pakistan.
Typical rate — confirm with your accountant.
Saved on this device only. We never see the recipe.
My recipes (0)
Nothing saved yet. Cost a dish and press Save.
Costed with dinekite.com/tools/recipe-cost-calculator · Margherita pizza · 1 portions
How to cost a recipe in three steps
- Enter the pack the way the invoice reads: 5 kg of flour for $9.00. Do not pre-divide into a per-gram price. The calculator derives that.
- Enter what this dish uses — 220 g of dough, 80 g of mozzarella, 8 ml of oil. Units can differ from the pack. Within a dimension it converts. Across dimensions (piece ↔ gram, litre ↔ gram) it asks for a piece weight or a density. It never assumes 1:1.
- Set how many portions the batch makes, a target food cost percentage (30 is the usual starting point) and the tax rule in your market. You get a plate cost and a menu price rounded up to the local ending.
The food cost formula, with a worked plate
Plate food cost % = plate cost ÷ net menu price. Net means before VAT, GST or sales tax. Tax is not the restaurant’s money, so a London menu at £12.00 including 20% VAT is measured on £10.00. A US check that adds sales tax after the printed price is already net.
To set a price: menu price = plate cost ÷ target food cost. Then add tax if your market is inclusive, then round up so the printed price never pushes food cost above the target.
Margherita pizza · sells at $14.00
2.96 ÷ 14 = 21.1% food cost. At a 30% target the unrounded price is 9.87; rounded up to a .99 ending that is $9.99. The gap to 30% is headroom: keep it, spend it on basil, or drop the price if the street will not bear $14.00.
The same arithmetic, step by step, is in the food cost formula guide.
The same method in six markets
Each row is one of the built-in examples, run through the same engine as the calculator. Load any of them from the dish menu above.
| Dish | Currency | Plate cost | Menu price | Food cost % | Price at 30% | Tax |
|---|---|---|---|---|---|---|
| Margherita pizza | USD | $2.96 | $14.00 | 21.1% | $9.99 | Sales tax added (by state) |
| Margherita pizza | GBP | £2.30 | £12.00 | 23.0% | £9.99 | VAT 20% inclusive |
| Butter Chicken | INR | ₹119.70 | ₹420 | 28.5% | ₹400 | GST 5% added |
| Chicken Shawarma | AED | AED 4.77 | AED 19 | 26.4% | AED 17 | VAT 5% inclusive |
| Chicken Shawarma | SAR | SAR 5.55 | SAR 22 | 29.0% | SAR 22 | VAT 15% inclusive |
| Chicken Karahi | PKR | PKR 275.75 | PKR 1,450 | 19.0% | PKR 920 | Provincial, added |
As-purchased vs edible weight — why yield changes plate cost
The Margherita numbers above are as-purchased: 220 g of dough off the scale is what you paid for. Basil is 4 g as-purchased at 60% yield, and that line’s cost does not move, because you already paid for the stems.
If the recipe is written as 4 g of picked basil, open Advanced, set the line to trimmed / edible, and keep yield at 60%. The calculator buys 4 ÷ 0.60 g and the line costs more. Mix the two methods on one dish and the total is fiction.
Typical yields — starting points, weigh your own
These are industry starting points, not your walk-in. A 2% miss on chicken, on a hundred covers, is real money. Weigh a pack once.
What a good food cost percentage is, by format
Not a promise and not a KPI you copy from a Facebook group. Typical industry ranges:
Beverage mixes this. A café with 22% food cost and cheap coffee looks healthy until you split the two. High-protein fine dining runs hotter than a dal-and-rice thali, and that is not a failure. Compare a dish to its own target, not to a national average.
Tax-inclusive menu pricing vs exclusive, and why food cost uses the net
US sales tax is added on the bill and varies by state, so this tool defaults USD to 0% and lets you type the rate you charge. UK 20% VAT sits inside the menu price. India GST (typically 5% on restaurant food) is added on the bill. UAE 5% VAT and KSA 15% VAT are inside the number on the menu. Pakistan’s provincial restaurant tax varies by province and by card vs cash, so PKR defaults to 0%.
Food cost is always plate cost ÷ net price. Inclusive VAT left in the denominator understates food cost relatively by rate ÷ (1 + rate): a UAE menu reads about 5% lower than it really is, a KSA menu about 13% lower, a UK menu about 17% lower. Most free calculators we looked at ignore this. Confirm the rate with your accountant; the preset is typical.
Menu pricing endings by market
Suggested prices round up, never down, so the food cost at the printed price is at or under the target you set.
- US and UK: .99 charm ending.
- India: up to the next ₹5.
- UAE and KSA: up to the next 1.00.
- Pakistan: up to the next Rs 10.
You can change the ending. The default follows the market of the currency you picked.
Plate cost FAQ
What is plate cost?
Plate cost is the ingredient cost of one portion: what you used, at what you paid, after converting packs into recipe units. On the Margherita pizza in this calculator it is $2.96. It is not your food cost percentage, and it does not include labour, gas or rent.
How do you calculate food cost percentage?
Food cost % = plate cost ÷ net menu price. Net means before tax. $2.96 ÷ $14.00 = 21.1%. To set a price, divide plate cost by your target: 2.96 ÷ 0.30 = 9.87, then round up to the local ending — $9.99 in the US.
Should I cost as-purchased weight or edible weight?
As-purchased is the raw amount off the scale. Yield does not change that plate cost. Use edible / trimmed when the recipe is written as the amount on the plate; then yield grosses the cost up, because you had to buy more than you plated.
How do sales tax, VAT and GST change the food cost formula?
Measure food cost on the net (pre-tax) price. US sales tax is added on the bill and varies by state — the printed menu price is already net. UK VAT is 20% inclusive, so it must be stripped before you divide. India GST is typically 5% added on the bill. UAE 5% VAT and KSA 15% VAT are inclusive. Pakistan's provincial restaurant tax varies by province and payment method; the PKR default is 0%. Inclusive VAT left in the price understates food cost relatively by rate ÷ (1 + rate): about 17% in the UK, about 5% in the UAE, about 13% in KSA. Confirm the rate with your accountant; the default is typical, not a ruling.
What food cost percentage should a restaurant aim for?
There is no universal number. Typical industry ranges: QSR 25–32%, casual dining 28–35%, fine dining 28–40%, café food 22–30%, bakery 20–32%. A pizza at 21.1% is headroom, or a neighbourhood that will not bear a lower price, or a recipe that forgot the oil. The percentage starts the conversation.
Do you save my recipes on a server?
No. Save writes to localStorage on this device, up to 50 recipes. Share puts the recipe in the URL hash, which is never sent to our servers. If the browser blocks storage (often private mode), Save is disabled and Share, Print and CSV still work.
How do I cost a sauce or gravy used in many dishes?
This free tool costs one dish. Treat the sauce as one purchased ingredient with its pack price. Dinekite inventory costs sub-recipes recursively, so a cumin price change reprices every parent dish.
Why does this not match my spreadsheet?
Usually units or yield. Spreadsheets often treat 1 piece as 1 gram, or apply yield to as-purchased lines, or measure food cost on a VAT-inclusive price. This calculator converts within a dimension, refuses to guess across dimensions, applies yield only to trimmed lines, and always uses the net price.
Costing one dish by hand is how you learn the method. Costing the whole menu, and keeping it live when a supplier invoice moves, is inventory in Dinekite. Plans are on pricing. More free tools on the tools hub.